| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat Belt | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003H4K000X |
| Title: SEAT BELT: REAR NO. 1 SEAT OUTER BELT ASSEMBLY: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
HINT:
- Use the same procedure for the LH side and RH side.
- The procedure listed below is for the RH side.
1. INSTALL REAR NO. 1 SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
|
(a) Align the rear No. 1 shoulder belt anchor adjuster positioning claw with the hole, and install the rear No. 1 shoulder belt anchor adjuster with the 2 bolts. Torque: 42 N·m (428 kgf·cm, 31 ft·lbf) |
2. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH
|
(a) Align the claws on the body with the rear No. 1 seat outer belt retractor positioning holes. |
(b) Install the rear No. 1 seat outer belt with the 2 bolts.
HINT:
First install bolt A, and then install bolt B.
- for Bolt A
Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)
- for Bolt B
Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)
|
(c) Install the shoulder anchor to the shoulder belt anchor adjuster with the nut. Torque: 42 N·m (428 kgf·cm, 31 ft·lbf) |
3. INSTALL REAR SIDE NO. 2 AIR DUCT
4. INSTALL REAR WINDOW SIDE GARNISH ASSEMBLY RH
5. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Manual Seat)
6. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)
7. INSTALL REAR FLOOR MAT SUPPORT PLATE
8. INSTALL ROPE HOOK ASSEMBLY
9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
10. INSTALL REAR DOOR SCUFF PLATE RH
11. INSTALL REAR FLOOR STEP NO. 1 COVER
12. INSTALL REAR FLOOR STEP NO. 2 COVER
13. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH
14. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
(a) Install the rear No. 2 seat assembly
.
15. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
(a) Install the rear No. 2 seat assembly
.
|
|